HOW TO CUT LED STRIPS?

HOW TO CUT LED STRIPS?

HOW TO CUT LED STRIPS?

When you want to cut the strip and reattach it to other spots on the strip, you need to read the following text very carefully.

We can deliver the LED Strips cut in the right size if neccesary. Use the intended markings to cut the strip. The solder points are marked with: +, R, G, B. Do not exceed the maximum solder time of 10 seconds and maximum temperature of 260 degrees. You can solder the wire onto the solder points so you can extend the strip.

Make sure that the surface where the LED Strip is being applied is clean and grease-proo. The minimum bend radius of the strip is 2 centimeters. On the spots where there are no components, the bend radius is even smaller. When you bend the strip take into account that it can only be bend onceon the same spot, this way we prevent any damage.

You can connect the cut part to the LED controller by using the included connection wires.

    • Related Articles

    • LED Koofverlichting

      LED KOOFVERLICHTING WAT IS LED KOOFVERLICHTING? Vaak is koofverlichting een indirecte vorm van verlichting, waarbij de LED strip zo wordt geïnstalleerd dat deze het plafond uitlicht en daarmee voor indirecte verlichting van de ruimte zorgt. Bij ...

    • LED verlichting besturen met wand-touchpaneel

      LED WAND CONTROLLER TOUCH PANEEL Aantrekkelijk design, maximale flexibiliteit! Jij wilt LED verlichting bedienen met een afstandsbediening maar deze wel netjes hebben weggewerkt? Dan word jij blij van onze nieuwe D-serie LED wand controllers! Geen ...

    • LED PROFILE

      LED PROFILE A tight LED line in LED aluminum profile can be simply perfect. The LED line looks slightly tighter and more beautiful in an LED profile. We find the finish installations very important. LED profile with a profile hood provides additional ...

    • LED WALL CONTROLLER TOUCH PANEL

      LED WALL CONTROLLER TOUCH PANEL Attractive Design, Maximum Flexibility If you want to control your LED lighting with a remote control but don’t want to lose the remote, choose our  LED wall controller from the D-serie. No remote control which you’re ...

    • LED COVE LIGHTING

      LED COVE LIGHTING Our LED Strips are being used in many coves. We've experienced that it's more convenient to place the LED Strip on the edge of the cove. In this way you increase the radiation angle and you can illuminate a larger area. See the ...